Installation Procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Install the side rail(s).
- Install the side rail attaching bolts.
Tighten: Tighten the bolts 4 N.m (35 lb in).
- Install the cross rails by sliding toward front of vehicle and engaging lever on both sides.
- Install the rear pad covers by snapping into place.
NOTE:
Refer to FASTENER NOTICE
.