LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1691 (Bumper System) >> Repair Instructions >> Step Pad Replacement - Rear Bumper >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bumper. Refer to Bumper Replacement - Rear  .
  2. Remove the side molding push-pins.
    3. Fig 1: Removing Rear Bumper Step Pad
    GM347053Courtesy of GENERAL MOTORS CORP.
  3. Release the step pad from the bumper by prying up on the step pad.
  4. Remove the step pad.
scientia non olet · About LEMON Manuals