LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1691 (Bumper System) >> Repair Instructions >> Step Pad Replacement - Center Rear Bumper >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing Center Rear Bumper Step Pad
    GM803010Courtesy of GENERAL MOTORS CORP.
  1. Using a trim removal tool or suitable replacement, gently pry upward on the center step pad to release the retainers from the bumper.
  2. Lift up on the step pad and remove from the vehicle.
scientia non olet · About LEMON Manuals