LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1691 (Bumper System) >> Repair Instructions >> Bumper Replacement - Front (Old Style) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front grille. Refer to GRILLE REPLACEMENT (CADILLAC) or GRILLE REPLACEMENT (AVALANCHE) .
    2. Fig 1: Disconnecting Electrical Connector
    GM373577Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector from the fog lamps, if equipped.
    3. Fig 2: Retaining & Brace Bolts
    GM379248Courtesy of GENERAL MOTORS CORP.
  3. Remove the retaining bolts (1, 2) from the front bumper.
  4. Remove the brace bolt (3) from the front bumper.
  5. Remove the front bumper assembly from the vehicle.
  6. Remove the air deflector from the bumper if necessary. Refer to Air Deflector Replacement - Front Bumper Fascia  .
  7. Remove the fog lamps, if equipped. Refer to FOG LAMP REPLACEMENT - FRONT (EXCEPT Z71) or FOG LAMP REPLACEMENT - FRONT (Z71) .
scientia non olet · About LEMON Manuals