LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1690 (Stationary Window System) >> Repair Instructions >> Windshield Side Reveal Molding Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Front Door Sealing Weatherstrip
    GM441415Courtesy of GENERAL MOTORS CORP.
  1. Pull back the front door sealing weatherstrip (1) to expose the windshield reveal molding screws.
    2. Fig 2: Identifying Windshield Reveal Molding Screws
    GM301107Courtesy of GENERAL MOTORS CORP.
  2. Remove the screws from the windshield reveal molding.
  3. Remove the windshield reveal molding from the windshield pillar.
scientia non olet · About LEMON Manuals