LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1690 (Stationary Window System) >> Repair Instructions >> Rearview Mirror Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use a flat-bladed tool in order to remove the wire cover, if equipped.
    2. Fig 1: Electrical Connector
    GM375840Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector (1), if equipped.
  3. Using a TORX-head® screwdriver, loosen the set screw that holds the mirror base to the windshield button.
  4. Slide the mirror off of the support.
scientia non olet · About LEMON Manuals