Removal Procedure

WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.

Each lock striker is a dual-pin type that attaches to an anchor plate in the body lock pillar. The door is held in the closed position when the lock snaps over and engages the striker.

Mark the position of the striker.
Remove the screws.
Remove the door lock striker.

Fig 1: Removing Front Door Striker

Courtesy of GENERAL MOTORS CORP.

Remove the spacers as equipped.
Remove the washer.