LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1684 (Instrument Panel, Gages, And Console) >> Diagnostic Information and Procedures >> DTC B0600: IPC >> Diagnostic Aids

Diagnostic Aids

WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.

Use the Freeze Frame and/or Failure Records data in order to locate an intermittent condition. If you cannot duplicate the DTC, the information included in the Freeze Frame and/or Failure Records data may aid in determining the number of miles since the DTC set. The Fail Counter and Pass Counter can also aid in determining the number of ignition cycles that the diagnostic reported a pass and/or fail. Operate the vehicle within the same freeze frame conditions, i.e.RPM, load, vehicle speed, temperature, etc. This will isolate when the DTC failed.

Refer to TESTING FOR INTERMITTENT AND POOR CONNECTIONS in Wiring Systems.

Fig 1: DTC B0600
G01587419Courtesy of GENERAL MOTORS CORP.