LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1675 (Engine Mechanical - 3.1L V6 - VIN (J)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Valve Rocker Arm Cover Removal - Left

Valve Rocker Arm Cover Removal - Left

WARNING: This page is about a different car, the 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the valve rocker arm cover bolts.
    IMPORTANT: When removing the valve rocker arm cover make sure the gasket stays in place attached to the cylinder head.
  2. Remove the valve rocker arm cover and gasket.
    Fig 1: Removing Left Valve Rocker Arm Cover
    G01968015Courtesy of GENERAL MOTORS CORP.
  3. Cut the RTV in the channel where the intake, cylinder head and valve rocker arm cover meet with a suitable tool.
  4. Remove the valve rocker arm cover.
  5. Cut the RTV in the channel where the intake, cylinder head and valve rocker arm cover meet, with suitable tool.
  6. Remove the valve rocker arm cover gasket.
scientia non olet · About LEMON Manuals