LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1673 (Tire Pressure Monitoring System) >> Repair Instructions >> Tire Pressure Monitor Reset Procedure >> Using the RESET button

Using the RESET button

WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Adjust all tire pressures to the recommended kPa/psi.
  2. Turn ON the ignition, with the engine OFF.
  3. Press and hold the red RESET button located in the passenger side instrument panel fuse block.
  4. The LOW TIRE indicator will flash 3 times, then turn off.
  5. Use the scan tool in order to clear the TPM DTC.
scientia non olet · About LEMON Manuals