LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1667 (HVAC Systems - Manual) >> Repair Instructions >> Vacuum Tank Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the vacuum tank to the HVAC control module.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the screws to the vacuum tank.

    Tighten 

    Tighten the screws to 1.5 N.m (13 lb in).

    Fig 1: Installing Vacuum Tank & Mounting Bolts
    G01568928Courtesy of GENERAL MOTORS CORP.
  3. Connect the vacuum hoses to the vacuum tank.
    Fig 2: View Of Vacuum Hoses To Vacuum Tank
    G01568929Courtesy of GENERAL MOTORS CORP.
  4. Install the instrument panel insulator. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - RIGHT or to CLOSEOUT/INSULATOR PANEL REPLACEMENT - LEFT in Instrument Panel, Gages and Console.
scientia non olet · About LEMON Manuals