Installation Procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Install the horn (2) to the radiator support (1).
- Install the horn bolt.
Tighten: Tighten the horn bolts to 9 N.m (80 lb in).
- Connect the horn electrical connector.
- Lower the vehicle.
IMPORTANT:
Ensure that the black side of the horn is facing forward on the vehicle.
NOTE:
Refer to FASTENER NOTICE
.