Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Insert the hook of the wiper arm through the opening in the wiper blade.

Fig 1: Removing & Installing Wiper Blade At Wiper Arm Hook
Courtesy of GENERAL MOTORS CORP.
Position the wiper blade in the inside radius of the wiper arm hook.
Pull upward until the locking tab of the pivot engages the slot in the hook.

Fig 2: Wiper Blade Lock Tab (Pull Upward)
Courtesy of GENERAL MOTORS CORP.
Carefully lower the wiper arm and blade onto the windshield.