LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1661 (Wiper System & Washer System) >> Repair Instructions >> Washer Nozzle Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wiper arms. Refer to Wiper Arm Replacement .
  2. Remove the air inlet grille panel. Refer to AIR INLET GRILLE PANEL REPLACEMENT (ENVOY, TRAILBLAZER) in Body Front End.
  3. Remove the washer hose connection (1) from the nozzle.
    Fig 1: Identifying Windshield Washer Hose Routing
    GM751556Courtesy of GENERAL MOTORS CORP.
  4. Remove the washer nozzles from the air inlet grille panel by squeezing the retaining tabs (1).
    Fig 2: Washer Nozzles Retaining Tabs
    GM751560Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals