LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1661 (Wiper System & Washer System) >> Repair Instructions >> Washer Nozzle Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the washer nozzles to the air inlet grille panel, by indexing the tab in the air inlet grille panel to the washer nozzle.
    Fig 1: Washer Nozzles Retaining Tabs
    GM751560Courtesy of GENERAL MOTORS CORP.
  2. Be sure the retaining tabs (1) are secure.
  3. Install the washer hose connection (1) to the washer nozzle.
    Fig 2: Identifying Windshield Washer Hose Routing
    GM751556Courtesy of GENERAL MOTORS CORP.
  4. Install the air inlet grille panel. Refer to AIR INLET GRILLE PANEL REPLACEMENT (ENVOY, TRAILBLAZER) in Body Front End.
  5. Install the wiper arms. Refer to Wiper Arm Replacement .