LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1661 (Wiper System & Washer System) >> Repair Instructions >> Washer Hose Replacement - Rear (Liftgate) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the rear wiper hose connection (4) at the liftgate outer panel.
    Fig 1: View Of Rear Wiper
    GM751295Courtesy of GENERAL MOTORS CORP.
  2. Remove the liftgate interior trim panel. Refer to TRIM PANEL REPLACEMENT -- LIFT GATE (TRAILBLAZER, ENVOY, BRAVADA) .
  3. Remove the washer hose and grommet from the liftgate outer panel.
    Fig 2: Washer Hose & Grommet Removed
    GM751300Courtesy of GENERAL MOTORS CORP.
  4. Remove the liftgate wiring harness from the liftgate. Refer to WIRING HARNESS REPLACEMENT -- LIFT GATE in Body Rear End.
  5. Cut the rear washer hose ends where the hose ends break out of the harness.