Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing License Plate Handle Lever Bracket

Courtesy of GENERAL MOTORS CORP.

Install the license plate handle lever bracket into the slot in the license plate pocket.

Fig 2: Installing Liftgate Handle Into The License Plate Pocket

Courtesy of GENERAL MOTORS CORP.

Install the liftgate handle into the license plate pocket.
Install the liftgate handle spring to the liftgate handle.
Install a new liftgate handle pin.

Fig 3: Crimping Liftgate Handle Pin With Long Nose Pliers

Courtesy of GENERAL MOTORS CORP.

Crimp the liftgate handle pin with long nose pliers.
Install the license plate pocket. Refer to License Plate Pocket Replacement .