LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1657 (Lighting Systems) >> Repair Instructions >> Tail Lamp Bulb Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the tail lamp assembly. Refer to Tail Lamp Replacement .
  2. Remove the tail lamp circuit board. Refer to Tail Lamp Circuit Board Replacement .
  3. Place the tail lamp assembly onto a clean prepared surface.
  4. Pull the bulb straight out in order to remove the tail lamp bulb from the socket assembly.
    Fig 1: Tail Lamp Bulb
    GM743393Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals