LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1657 (Lighting Systems) >> Repair Instructions >> Headlamp Replacement (Envoy, Envoy XUV) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the headlamp assembly to the headlamp panel.
  2. Index and seat the tabs on the park/turn socket (4) to the headlamp assembly.
    Fig 1: Retaining Tabs, Headlamp Electrical Connectors, Side Marker Socket And Park/Turn Socket
    GM742005Courtesy of GENERAL MOTORS CORP.
  3. Index and seat the tabs on the side marker socket (3) to the headlamp assembly.
  4. Connect the headlamp electrical connector (2).
  5. Align and install the 4 locator pins on the back of the headlamp assembly into the retaining tab holes.
  6. Push down on the retaining tabs (1) in order to lock the headlamp assembly into the headlamp panel.
  7. Close the hood.
scientia non olet · About LEMON Manuals