Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Open and support the hood.
Pull up on the retaining tabs (1) in order to remove the headlamp assembly from the headlamp panel.

Fig 1: Removing/Installing Headlamp Assembly Components (Bravada & Rainier)
Courtesy of GENERAL MOTORS CORP.
Disconnect the headlamp electrical connector (2) from the headlamp assembly.
Remove the park/turn socket (3) from the headlamp assembly.
Remove the headlamp assembly from the headlamp panel.