LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1657 (Lighting Systems) >> Repair Instructions >> Hazard and Turn Signal Flasher Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left closeout/insulator panel. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - LEFT in Instrument Panel, Gages and Console.
  2. Remove the flasher retaining bracket from the insulator panel.
  3. Disconnect the flasher from the electrical connector.
    Fig 1: Flasher Retaining Bracket And Electrical Connector
    GM763321Courtesy of GENERAL MOTORS CORP.
  4. Remove the flasher from the vehicle.
scientia non olet · About LEMON Manuals