LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1657 (Lighting Systems) >> Repair Instructions >> Courtesy Lamp Replacement - Instrument Panel >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left closeout/insulator panel. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - LEFT in IP Gages and Console.
    2. IMPORTANT: The courtesy lamp lens assembly can not be removed from the closeout/insulator panel until the bulb is removed.
  2. Carefully remove the bulb from the courtesy lamp socket.
  3. If removing the lens assembly from the closeout/insulator panel, release the retaining tabs on the lens/socket and push the lens assembly downward.
  4. Remove the lens assembly from the closeout/insulator panel.
    Fig 1: Removing/Installing Courtesy Lamp Assembly, Retaining Bolts And Electrical Connector
    GM714012Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals