LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1655 (Cellular Communication System) >> Repair Instructions >> Antenna Replacement - Cellular Communications (Utility) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Cadillac Escalade EXT. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Cell Antenna Base
    GM718088Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the coaxial cable from the cell antenna base.
  2. Remove the cell antenna base from the glass, by using a wide-bladed plastic tool between the glass and the antenna base.
  3. Fig 2: Cleaning and Drying Glass
    GM569466Courtesy of GENERAL MOTORS CORP.
  4. Remove the antenna mast from the outside of the antenna base.
  5. Remove all residue by using a razor blade and isopropyl alcohol.