LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1650 (Retained Accessory Power System) >> Description and Operation >> DTC B1445 >> Circuit Description

Circuit Description

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

The body control module (BCM) controls some retained accessory power (RAP) functions through the RAP supply voltage circuit. When the ignition switch is in either the ACC or the ON position, the BCM provides battery voltage to the RAP supply voltage circuit.

When the ignition switch turns from ON or ACC to OFF, with all of the vehicle doors closed, the BCM still provides battery voltage to the circuit for 10 minutes, or until any vehicle door opens.