LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1649 (Seat Belt System) >> Repair Instructions >> Seat Belt Retractor Replacement-Rear (Crew Cab) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat, if required. Refer to SEAT REPLACEMENT-REAR (EXTENDED CAB W/4TH DOOR) or SEAT REPLACEMENT-REAR (EXTENDED CAB) or SEAT REPLACEMENT-REAR (60/40 SPLIT) .
  2. Remove the rear quarter trim panel. Refer to TRIM PANEL REPLACEMENT-FRONT SEAT .
  3. Remove the rear seat belt to body bolts.
  4. Remove the rear seat belt retractor to body bolt (1).
  5. Fig 1: Removing Rear Seat Belt Retractor To Body Bolts (Crew Cab)
    G01578389Courtesy of GENERAL MOTORS CORP.
  6. Remove the retractor from the vehicle.