LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1649 (Seat Belt System) >> Repair Instructions >> Seat Belt Buckle Replacement-Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the seat belt buckle in the vehicle.
  2. Connect the electrical connection (2).
    NOTE: Refer to FASTENER NOTICE .
  3. Install the front seat belt buckle nut (1).

    Tighten 

    Tighten the nut to 53 N.m (39 lb ft).

    Fig 1: Installing Front Seat Belt Buckle Nut
    G01578355Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals