LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1647 (Seat System) >> Diagnostic Information and Procedures >> DTC B1850, B1860, B1960, B2355, B2365 Or B2375: Position Sensor Signal >> Test Description

Test Description

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

The numbers below refer to the step numbers on the diagnostic table.

3. During this test the driver seat module must see an active switch input before power will be supplied the position sensor.

4. During this test the driver seat module must see an active switch input before power will be supplied the position sensor.

5. During this test the driver seat module must see an active switch input before power will be supplied the position sensor.

Fig 1: DTC B1850, B1860, B1960, B2355, B2365 Or B2375 (Steps 1 - 4)
G01579151Courtesy of GENERAL MOTORS CORP.
Fig 2: DTC B1850, B1860, B1960, B2355, B2365 Or B2375 (Steps 5 - 13)
G01579152Courtesy of GENERAL MOTORS CORP.