LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1646 (Door System, Mirror System & Window System) >> Repair Instructions >> Sealing Strip Replacement - Front Door Window Belt Outer-Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: The outer belt sealing strip seals between the inner and outer door panels and the window at the belt line. The outer sealing strip is replaceable. Do not remove the inner sealing strip, because the strip is attached to the glass run channel.
  1. Lower the window.
  2. Remove the outside mirror. Refer to Mirror Replacement (Manual)   or Mirror Replacement (Power Mirror)   . 
  3. Remove the outer sealing strip from the door, lifting up on the forward end in order to unhook the rear of the strip from the window run channel.
    Fig 1: Removing Front Door Window Belt Outer Sealing Strip
    G01577983Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals