LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1645 (Body Front End) >> Repair Instructions >> Seal Replacement-Hood Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Align the slot in the rear hood seal with the cowl pinch-weld flange and press into place.

Fig 1: Hood Rear Seal
G01579066Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals