LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1643 (Stationary Window System) >> Repair Instructions >> Rear Window Replacement (Pickup) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a stationary window into the opening. Refer to Urethane Adhesive Installation Of Stationary Windows   . 
  2. Install the window lower garnish molding. Refer to MOLDING REPLACEMENT-REAR WINDOW LOWER .
  3. Install both rear seat headrests (extended cab). Refer to HEAD RESTRAINT REPLACEMENT .
  4. Raise the rear seat back.
  5. Remove the double layer of masking tape around the perimeter of the painted surfaces and interior trim.
scientia non olet · About LEMON Manuals