LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1642 (Exterior Trim) >> Repair Instructions >> Wheel Opening Flare Replacement-Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the push-pins from the wheel opening flare.
  2. Starting from one end of the flare remove the wheel opening flare from the front fender.
  3. Clean the area in order to remove any dirt or adhesive from the fender.
    Fig 1: Front Wheel Opening Flare
    G01578709Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals