Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

For diesel only, remove the winter cover, if equipped and installed.
Open the hood.
Remove the upper grille baffle.

Fig 1: Removing Upper Grille Baffle
Courtesy of GENERAL MOTORS CORP.
Using a Phillips screw driver, rotate the grille retainer 1/4 turn counterclockwise.

Fig 2: Rotating Grille Retainer
Courtesy of GENERAL MOTORS CORP.
Remove the screw holding the grille to the latch support.

Fig 3: Removing Screw Holding Grille To Latch Support
Courtesy of GENERAL MOTORS CORP.
Unsnap the grille end from the fender. Remove the grille from the vehicle.

Fig 4: Removing Grille End From Fender
Courtesy of GENERAL MOTORS CORP.