LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1636 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Storage Compartment Replacement - Console End Panel >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the storage compartment until the locking tabs are fully seated.
    Fig 1: Installing Storage Compartment
    G01579488Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the 2 retaining bolts (1).

    Tighten 

    Tighten the 2 bolts to 1.6 N.m (14 lb in).

    Fig 2: Installing Retaining Bolts
    G01579489Courtesy of GENERAL MOTORS CORP.