LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1636 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Cupholder Replacement (Non-Luxury) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the cup holder by pushing inwards till the clips (1) click in place.
  2. Ensure around the corners of the cup holder is seated properly.
    Fig 1: Non-Luxury Cupholder
    G01579437Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals