LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1636 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Console Replacement (Pro) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cupholder assembly. Refer to Cupholder Replacement (Luxury)   or Cupholder Replacement (Non-Luxury)   or Cupholder Replacement (Rear)   or Cupholder Replacement (Pro)   . 
  2. Remove the console lid and bin assembly. Refer to Console Storage Bin Replacement (Expect Pro)   or Console Storage Bin Replacement (Pro)   . 
  3. Remove the 6 console retaining bolts (1).
  4. Lift up the console slightly in order to disconnect the wire connectors.
  5. Remove the console from the bracket.
    Fig 1: Console (Pro)
    G01579484Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals