LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1631 (Wiper System & Washer System) >> Diagnostic Information and Procedures >> Wiper Arm Tip Pressure Check

Wiper Arm Tip Pressure Check

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Checking Wiper Arm Tip Pressure
G01577370Courtesy of GENERAL MOTORS CORP.
  1. Run the wiper arms to the mid-wipe position.
  2. Remove the wiper blades from the wiper arms. Refer to Wiper Arm Blade Replacement   . 
  3. Attach a scale to the end of the wiper arm and measure the force required to lift the wiper arm perpendicular to the windshield to normal working height with the blade attached.
  4. Replace the wiper arm if the measurement is not within the specification. Refer to Wiper Arm Replacement   . 

    Tip Pressure 

    • Driver Side-8.1-9.5 Newtons (29-34 Ounces)
    • Passenger Side-5.8-7.0 Newtons (21-25 Ounces)