LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1627 (Manual Transmission Clutches) >> Repair Instructions >> Clutch Start Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the clutch pedal position switch to the pushrod with the plastic tabs.
  2. Connect the clutch pedal position switch electrical connector (1).
    Fig 1: Clutch Start Switch
    G01953268Courtesy of GENERAL MOTORS CORP.