LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1627 (Manual Transmission Clutches) >> Repair Instructions >> Clutch Actuator Cylinder Replacement (ZF S6-650 Transmission) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the manual transmission. Refer to TRANSMISSION REPLACEMENT .
  2. Remove the clutch actuator cylinder bolts.
  3. Remove the clutch actuator cylinder.

    If required, the clutch release bearing can be removed from the clutch actuator cylinder for replacement.

    Fig 1: Removing Clutch Actuator Cylinder (ZF S6-650)
    G01953285Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals