LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1626 (Automatic Transmission - 4L80-E - Service & Replacement) >> Diagnostic Information and Procedures >> Automatic Transmission Oil Cooler Flushing and Flow Test >> Clean-up

Automatic Transmission Oil Cooler Flushing and Flow Test: Clean-up

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the water supply hose from the J 35944-A  and bleed any remaining air pressure from the flusher tank.
  2. Remove the fill cap from the J 35944-A  and return any unused flushing solution to its container. Rinse the J 35944-A  with water. Do not store the J 35944-A  with flushing solution in it.
  3. After every third use, clean the J 35944-A  as described in the instructions included with the tool.
  4. Dispose of any waste water/solution and transmission fluid in accordance with local regulations.