LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1622 (Manual Transmission - NV 3500) >> Repair Instructions >> Transmission Housing Oil Seal Replacement-Rear (2WD) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra and 2003 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear propeller shaft. Refer to PROPELLER SHAFT REPLACEMENT - ONE PIECE or PROPELLER SHAFT REPLACEMENT - TWO PIECE .
  2. Remove the rear oil seal using J 6125-1B  (1) and J 23129  (2).
    Fig 1: Removing Rear Oil Seal (2WD)
    G01953004Courtesy of GENERAL MOTORS CORP.