Coolant Air Bleed Pipe Removal

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Remove the engine coolant air bleed pipe bolts (1).
Remove the pipe (2) and gaskets (3).

Fig 1: Removing Engine Coolant Air Bleed Pipe, Gaskets & Bolts
Courtesy of GENERAL MOTORS CORP.
Remove the engine coolant air bleed pipe cover bolts (1) and covers (2).

Fig 2: Removing Engine Coolant Air Bleed Pipe Cover Bolts & Covers
Courtesy of GENERAL MOTORS CORP.
Remove the gaskets from the pipe and covers.
Discard the gaskets.

Fig 3: Removing Gaskets
Courtesy of GENERAL MOTORS CORP.
Remove the hose (1) from the pipe (2).

Fig 4: Removing Hose From Pipe
Courtesy of GENERAL MOTORS CORP.