LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1618 (Engine Mechanical - 4.3L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Crankshaft and Bearings Removal

Crankshaft and Bearings Removal

WARNING: This page is about a different car, the 2003 GMC Sierra and 2003 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Mark or identify the crankshaft bearing cap locations, direction, and positions for assembly.
  2. Remove the crankshaft bearing cap bolts.
  3. Remove the crankshaft bearing caps.
    Fig 1: Removing Crankshaft Bearing Caps & Bolts
    G02106185Courtesy of GENERAL MOTORS CORP.
  4. Remove the crankshaft.
    Fig 2: Removing Crankshaft
    G02106186Courtesy of GENERAL MOTORS CORP.
  5. Remove the crankshaft bearings from the crankshaft bearing caps.
    Fig 3: Removing Crankshaft Bearings & Crankshaft Bearing Caps
    G02106187Courtesy of GENERAL MOTORS CORP.
  6. Remove the crankshaft bearings from the engine block.
    Fig 4: Removing Crankshaft Bearings
    G02106188Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals