LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1615 (Transfer Case - NVG 261-NP2 (Two Speed Manual)) >> Repair Instructions >> Transfer Case Input Shaft Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transfer case. Refer to Transfer Case Assembly Replacement .
  2. Using a flat-tipped screwdriver, remove the input shaft seal.
    Fig 1: Removing Input Shaft Seal
    G01481270Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals