LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1613 (Transfer Case - NVG 149-NP (One Speed Automatic)) >> Repair Instructions >> Transfer Case Shield Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra and 2003 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the transfer case shield, if equipped.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the transfer case shield bolts, if equipped.

    Tighten 

    Tighten the bolts to 20 N.m (15 lb ft).

  3. Lower the vehicle.
    Fig 1: Transfer Case Shield & Bolts
    G01481018Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals