Tools Required
WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- J 7818 Inner Bearing Race Installer, 9.5 inch axle
- J 8092 Driver Handle 3/4 in - 10
- J 8608 Rear Pinion Bearing Race Installer, 8.6 inch, 11.5 inch axle
- J 8614-01 Flange and Pulley Holding Tool
- J 22306 Pinion Cup Bearing Installer-Rear, 9.5 inch axle
- J 22388 Rear Axle Pinion Oil Seal Installer, 8.6 inch, 9.5 inch axle
- J 22912-01 Split Plate Bearing Puller
- J 24433 Pinion Cone and Side Bearing Installer, 8.6 inch axle
- J 36614 Inner Pinion Bearing Installer, 9.5 inch axle
- J 44412 Pinion Bearing Installer, 11.5 inch axle
- J 44414 Rear Axle Pinion Oil Seal Installer, 11.5 inch axle
- J 44417 Rear Pinion Bearing Race Installer, 11.5 inch axle
- J 45871 Pinion Bearing Remover
- J 45900 Pinion Bearing Cup Installer, 8.6 in axle