LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1611 (Front Drive Axle) >> Repair Instructions >> Clutch Fork Replacement - Front Drive Axle >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the inner axle shaft and housing assembly. Refer to Inner Shaft and/or Housing Replacement - Front Drive Axle (8.25 S4WD and 9.25 Axles)  or Inner Shaft and/or Housing Replacement - Front Drive Axle (8.25 F4WD Axle) .
  2. Remove the clutch fork assembly (2) from the inner axle shaft housing (1).
  3. Remove the clutch fork inner spring from the differential carrier case assembly, if necessary.
Fig 1: Clutch Fork Assembly & Inner Axle Shaft Housing
G01480407Courtesy of GENERAL MOTORS CORP.