LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1611 (Front Drive Axle) >> Repair Instructions >> Clutch Fork Replacement - Front Drive Axle >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the clutch fork inner spring into the differential carrier case assembly, if necessary.
  2. Install the clutch fork assembly (2) into the inner axle shaft housing (1).
  3. Install the inner axle shaft and housing assembly. Refer to Inner Shaft and/or Housing Replacement - Front Drive Axle (8.25 S4WD and 9.25 Axles)  or Inner Shaft and/or Housing Replacement - Front Drive Axle (8.25 F4WD Axle) .
Fig 1: Clutch Fork Assembly & Inner Axle Shaft Housing
G01480408Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals