LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1608 (Front Suspension System) >> Repair Instructions >> Torsion Bars Bushing Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: This procedure requires the removal of both torsion bars.
  1. Raise and support the vehicle. Refer to JACKING AND LIFTING .
  2. Remove the torsion bars. Refer to Torsion Bar Replacement .
  3. Remove the bushing from the bracket utilizing a bushing driver or the equivalent.
scientia non olet · About LEMON Manuals