LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1605 (Power Steering System) >> Repair Instructions >> Power Steering Gear Outlet Hose Replacement (Rack and Pinion) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the power steering outlet hose (4) to the power steering cooler (5).
  2. Connect the power steering outlet hose (4) to the power steering gear (3).
    NOTE: Refer to FASTENER NOTICE .
  3. Connect the power steering outlet hose (2) to the power steering pump (1).

    Tighten 

    Tighten the hose connections to 28 N.m (20 lb ft).

  4. Bleed the power steering system. Refer to Bleeding the Power Steering System .
  5. Inspect all the hose connections for leaks.
Fig 1: Install Power Steering Outlet Hoses
G01479553Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals