Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Remove the IP insulator. Refer to INSULATOR REPLACEMENT -- INSTRUMENT PANEL (I/P) .
Disconnect the electrical connector (8) from the air temperature actuator (9).

Fig 1: Disconnect Electrical Connector From Air Temperature Actuator
Courtesy of GENERAL MOTORS CORP.
Remove the air temperature actuator retaining screws.

Fig 2: Remove Air Temperature Actuator Retaining Screws
Courtesy of GENERAL MOTORS CORP.
Remove the air temperature actuator.

Fig 3: Remove Air Temperature Actuator
Courtesy of GENERAL MOTORS CORP.